Test Bank for Clinical Laboratory Chemistry 2nd Edition by Sunheimer

Test Bank for Clinical Laboratory Chemistry 2nd Edition by Sunheimer Study material

Clinical Laboratory Chemistry, 2e (Sunheimer) Chapter 1 Laboratory Basics 1) Ion-exchange filters remove which of the following from a water source? A) Ions to reduce the mineral content of water B) Lead C) Organic solvents. D) Bacteria Answer: A 2) Activated carbon filters remove: A) Ions from water. B) Organic compounds from water. C) Acids and bases from water. D) Large particulates from water. Answer: B 3) A 0.22-micron filter will remove: A) Particles with a diameter of 0.01 microns. B) Particles with a diameter of 0.01 nanometers. C) Particles with a diameter of 2.2 microns. D) Only sodium chloride crystals. Answer: C 4) The unit of resistivity is: A) Amperes. B) Volts. C) Coulombs. D) MΩ ∙ cm. Answer: D 5) Microbiological impurities in source water are reported in which format? A) Colony forming units per mL (Cfu/mL) B) Total organic carbon (TOC) in ng/g C) milligrams of SiO2 D) Resistivity. Answer: A 6) According to CLSI, the resistivity of clinical laboratory reagent water (CLRW) must be: A) > 100 milliamps. B) < 10 millivolts. C) > 10 MΩ ∙ cm. D) < 10 MΩ ∙ cm. Answer: C

The best Clinical Laboratory Chemistry test bank for university students

7) Which of the following should not be storied in borosilicate glass because it will etch the inside surface of the glass container? A) Saline B) Strong bases (caustics) C) Clinical laboratory reagent water D) Weak acids Answer: B 8) Low actinic glassware has which of the following properties? A) High thermal resistance with no color added to the glass B) Low thermal resistance with a green-yellow color added as an integral part of the glass C) High thermal resistance with a blue color added as an integral part of the glass D) High thermal resistance with an amber or red color added as an integral part of the glass Answer: D 9) Care must be taken before selecting polyethylene plastic for use as test tubes and disposable transfer pipets because: A) Polyethylene can bind or absorb proteins, dyes, stains, and picric acid. B) Polyethylene does not bind or absorb proteins, dyes, stains, and picric acid. C) Polyethylene cannot be used to pipet serum. D) Polyethylene forms insoluble salts in the presence of sodium chloride. Answer: A 10) Which of the following classes of glassware, including pipets, is manufactured and calibrated to deliver the most accurate volume of liquid? A) A B) B C) AA D) C Answer: A 11) A to deliver or TD pipet is designed to: A) Allow the user to remove a portion of the sample in the tip for better accuracy. B) Be vigorously tapped against the test tube after all the liquid is removed. C) Drain by gravity. D) Be refilled or rinsed out with the appropriate solvent after the initial liquid has been drained from the pipet. Answer: C 12) Which of the following devices is used to calibrate laboratory thermometers? A) Barometer B) Gallium melting point cell C) Titanium freezing point cell D) Platinum cathode voltmeter Answer: B 3 13) Convert 75 mg/dL to mg